Image of Deken Logo
Products toll free 800-748-6800
bottom round
4 standard models with working areas of 8'X12', 8'X14', 8'X16', 8'X18' and 6' x 8'.
Dies or parts can be positioned for washing via overhead crane or forklift (DL Model).

This is an exclusive “closed loop” filtration system that recycles the cleaning solution through two filter systems and an oil skimmer to effectively remove dirt, contaminants and excess oil. An oil concentrator unit further reduces the water content in the oil to less than 2% (a tremendous cost saver).
A Master Control Electrical Enclosure provides the operator with control over: On/Off; Pump On/Off; Cleaning Solution Temperature; Air Blow-off (drying wands); Emergency Off; Makeup Water Condition; Ozone Generating Unit and; Low Water Level Shut-off, if necessary. The electrical system is 480/60 3-phase power in.
Heavy duty welded steel construction, consisting of heavy wall seamless steel tubing, continuous welded with powder coat finish. Cleaning solution tank assemblies are welded and formed stainless steel.
Capacity is 500 or 900 lbs. per sq. ft. deck loading.
Two stainless steel spray wands and nozzle assemblies at opposite diagonal ends allow for convenient access to all sides of the die being washed. Additionally, two high efficiency compressed air, stainless steel drying wands, located on opposite diagonal ends provide for blow-off and drying of the die.
Retractable heavy duty clear view sure-fold water containment curtains approx. 8' high on 4 sides allow for illumination, provide easy access to the die while cleaning and contain overspray.
Closed Loop Dual Filtration System with built in “Mighty Oil Skimmer” removes oil from the wash solution continuously and effectively and deposits the oil into two removable 5 gallon containers. An “Oil Concentrator Unit” reduces the water content in the oil to less than 2%. The skimmed oil containers are easily changed. Changing filter cartridges is an easy one-minute operation. Replacement filter elements cost less than $15 each.
Cal-Rod Heaters mounted in the stainless steel tank enclosure assure optimum working temperature of the cleaning solution. Solution temperature can be set and changed at the master electrical control enclosure to comply with numerous cleaning formulations.
A 1,000 or 2,000 PSI pressure pump delivers cleaning solution to both high pressure spray wands.
Bacteria and Odor Prevention is accomplished with a standard Deken Power “Ozonimatic” ozone generator, which prevents the formation and growth of bacteria and controls unpleasant smells that normally prevail in recirculating washing systems.
Storage. Spray Wands and nozzles and Drying Wands are stored out of the way in the forklift tubes in the base of the washer. There are two stainless steel spray wands located diagonally at opposite ends of the die washer, and two compressed air, high efficiency stainless steel drying wands on opposite diagonal ends of the washer.
“Easy Empty” system allows complete evacuation of fluids from the system into a 55 gallon drum in about 20 minutes.

Image #1 of diewasher

Image #1 of diewasher in use   Image #2 of diewasher in use

Image of holding tank

Image of pump assembly
Home | What's New at Deken | Product Index | About Deken Power | Consulting | Contact us
Link to blog